Masz vistę, więc bez zmodyfikowanych plików może nie pójść. Ale spróbuj (może TB dał pliki działające z vistą? panot do x800 dołącza). Podłącz etena (niech się połączy z komputerem), wypakuj to archiwum z romem do jednego katalogu. uruchom plik euus.exe. Dalej postępuj ze wskazówkami czyli next > yes > upgrade (pisze z pamięci, bo aktualnie nie wgrywam żadnego romu). Potem wygaśnie ekran, pojawi się taki al'a dos, zostaną przekopiowane pliki. Ponownie się uruchomi i powinien działać.
Jeśli jednak przez viste nie pójdzie, to chyba trzeba przez wgranie romu na kartę i z karty (musi to być karta o rozmiarze max 2GB i w systemie plików FAT16). Tutaj opis:
1) Synchronise with Outlook (or backup all your data somehow)
2) Copy the following files to the root of your freshly formated microSD card to 2GB capacity (formated into FAT16 filesystem):
- USBDLUpdate_Console.exe
- temp.bin
3) Put the card into M700
4) Enter to the bootloader mode (press and hold Camera button, Record button and Power button; press Reset with stylus while keeping all above buttons PRESSED;
Release all three buttons and M700 will show "USB Downloader ***" etc.)
5) If your card is formated correctly, you should see the following info:
USB Downloader Ready.
SD Card In
Find SDMMC Card.
File= TEMP BIN
Program Image from SDMMC
[etc]
6) The flashing should start automatically. Wait till it passes "USB host is not connected yet."
Make a HARD-RESET: remove the battery for a couple of seconds, reinsert it, close the
back cover, press Power button.
Enjoy;)