ETEN X500+ WM6 lighted ROM
Requirements: E-TEN X500+
Overview: Based on official Eten's X500+ WWE R02 032 0543 WM6
Language: English
Creator: eidamo
Release Date: 18.02.2008
Changes:
- 31 MB free (RAM)
- ROM: Latest driver for the latest microSD and all microSDHC inside the ROM (with ROM attribute )
- ROM: Changed GlyphCache to 65536(dec) and FontCache to 4096(dec)
- ROM: Call delay gone (patched CPLPHONE.DLL) + PhoneNetSelMode=10000(dec)
- ROM: Removed Windows Live, Windows Messenger (registry entries + service)
- ROM: Removed all .MUI except *.0409.MUI
- ROM: Removed FLOWER.JPG, WATERFALL.JPG, BROGENTCA.BAT
- ROM: Removed unneccesary CUSTOMINIT*.DLL
- ROM: MEMPOOL = 6MB
- ExtROM: Only these applications:
PREI_BkupRsto.3.2.AllLan.CAB
PREI_SatelliteDataUpdate.1.0.AllLan.CAB
PREI_SpeedDial.CAB
PREI_ZtQuickLink.2.0.AllLan.CAB
Download Instructions:
English ROM image (85MBytes)
http://rapidshare.com/files/92807170/temp.binYou can change MEMPOOL to 4 MB, 6 MB , 8 MB, 10 MB etc. with this tool (22MBytes)
http://rapidshare.com/files/92805918/mempoolx500plus.rarIf you have problem with SimTOOLKIT (banking etc.), use (577kBytes)
http://rapidshare.com/files/93081432/STK_patch_for_x500_plus.CABInstallation Instructions:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING !!
! YOU USE THIS ROM AT YOUR OWN RISK !!
!! SHOULD YOU BRICK YOUR DEVICE !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
HOW TO UPDATE:
0) !!! CHARGE YOUR BATTERY !!!
1) Backup your data !!!
2) Copy downloaded TEMP.BIN to the root of your freshly formated microSD card (formated into FAT16 filesystem) card
3) Put the card into X500+
4) Enter bootloader mode (press and hold Record button and Power button; press Reset while keeping all above buttons PRESSED;
keep the buttons PRESSED [except Reset] until X500+ shows "USB Downloader ***" etc.)
5) If your card is formated correctly, you should see the following info:
USB Downloader 0019
Flash Capacity=128MB
USB Downloader Ready.
SD Card In
Find SDMMC Card.
File= TEMP BIN
Program Image from SDMMC
[etc]
6) The flashing should start. Wait till it passes "EDGE Download status : " and finally
shows "USB host is not connected yet."
Make a HARD-RESET: remove the battery for a couple of seconds, reinsert it, close the
back cover, press and hold Hangup button (red one), press Power button. Keep the Hangup
pressed until "Erase all data" question appears. As soon as it pops up, release the Hangup
button and press and hold Left Softkey.
7) Enjoy