Muszę oddać HDka do serwisu.
Wcześniej miałem wgrany Rom Bysia [WM 6.1 PLK] V 6 RC3 FINAL i następny WM 6.5 eXtreme.
Przywróciłem oryginalny ROM (PLAY) i chciałem usunąć HSPL.
Zrobiłem dokładnie tak:
1. Gdy ROM jest już wgrany (PLAY), musimy usunąć również Hard SPL i wgrać stockowy SPL. W tym celu ściągamy plik:
Restore_Stock_SPL_114_2.zip
Potrzebna będzie też paczka z Hard SPL:
Unsigned_HardSPL_for_Blackstone_OliNex.zip
2. Podłączamy telefon kablem USB do komputera i czekamy, aż zakończy się synchronizacja ActibveSync.
3. Po rozpakowaniu paczki Unsigned_HardSPL_for_Blackstone_OliNex.zip ujrzymy tylko jeden plik: HardSPLWrapper_Blackstone.exe. Klikamy go dwa razy. Otworzy się okienko. Na razie nas ono nie interesuje. W tym samym katalogu, gdzie jest EXE, pojawią się pliki. Wśród nich RUU_Signed.nbh – to jest obraz HSPL.
4. Teraz trzeba podmienić RUU_Signed.nbh na identyczny plik wypakowany z archiwum Restore_Stock_SPL_114_2.zip.
5. Dalsza procedura przebiega tak samo, jak w opisie:
Hard-SPL dla HTC Touch HD – flashowanie w 1 min
Czyli: klikamy kilka razy „next” i czekamy, aż flashowanie dobiegnie końca.
Po tym zabiegu mam takie coś SPL-1.07.OliNex XA
Po resecie sprawdzam bootloadera i jest taki SPL-1.4.OliNex
A powinien być SPL-1.4.0000
POMÓŻCIE PROSZĘ, CO ROBIĘ NIE TAK 
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package from this post. (currently 1.13, 1.14, 1.15, 1.54)
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
trzeba też mieć zainstalowany na komputerze .NET framework, a w przypadku Visty – najnowszą aktualizację WMDC, poza tym bateria HD`ka musi byc naladowana min. 30-50%
Pozdrawiam