Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL

  • 21 Odpowiedzi
  • 29592 Wyświetleń

0 użytkowników i 2 Gości przegląda ten wątek.

*

Offline syrjusz

  • **
  • 222
  • Płeć: Mężczyzna
Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« dnia: Kwiecień 18, 2005, 23:55:40 »
Zapewne sporo osob mialo problemy z konfiguracja polaczenia Pocketa z PC przez WiFi!
Ja tez i dopiero ten artykol krok po kroku rozwial wszelkie problemy!

Warto przeczytac, jezeli ma sie jakiekolwiek problemy!

Naprawde prosto napisane, wiec wystarczy srednia znajomosc angielskiego!











Autor: Microsoft.

Ad Hoc Internet Sharing with Microsoft Windows XP
Microsoft Corporation
Published: October 2003
Updated: August 2004

Abstract
The Internet Connection Sharing (ICS) feature of Microsoft® Windows® XP allows you to share a single Internet connection with multiple computers. Built-in support for IEEE 802.11 wireless LANs (WLANs) allows you to create an ad hoc wireless network. These two features can be used together to share a wired Internet connection with the members of an ad hoc wireless network. This article describes how to quickly and easily use Windows XP to share a wired Internet connection with other WLAN computers.

 


 
Contents
Overview   1
Configuring Ad Hoc Internet Sharing   2
1. Connecting the ICS Host Computer to the Internet   2
2. Enabling Internet Sharing on the Internet Connection of the ICS Host Computer   4
3. Creating an Ad Hoc Wireless Network on the ICS Host Computer   4
4. Connecting to the New Ad Hoc Wireless Network from the Other Laptop Computers   6
Restoring the Configuration of the ICS Host Computer   9
Summary   10
Related Links   11
 

 
The steps to configuring ad hoc Internet sharing are the following:
1.   Connect the ICS host computer to the Internet.
2.   Enable Internet sharing on the Internet connection of the ICS host computer.
3.   Create an ad hoc wireless network on the ICS host computer.
4.   Connect to the new ad hoc wireless network from the other laptop computers.
The following sections describe these steps in detail.
Note  The following steps assume that the wireless network adapters installed in all of the wireless client computers can connect using a common 802.11 technology, such as 802.11b, 802.11g, or 802.11a.
1. Connecting the ICS Host Computer to the Internet
Connect an Ethernet cable that leads to the Internet to the Ethernet adapter on the ICS host computer. In many cases, the Internet connection will provide automatic IP addressing. To utilize this facility of the Internet connection, the Ethernet connection in the Network Connections folder in Windows XP must be configured for automatic addressing. To configure a computer running Windows XP for automatic addressing, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the network connection that corresponds to the Ethernet network adapter attached to the Internet, and then click Properties.
3.   On the General tab, double-click Internet Protocol (TCP/IP) in the This connection uses the following items list.
4.   On the General tab, click Obtain an IP address automatically and Obtain DNS server address automatically. An example is shown in the following figure.
 
5.   Click OK to save the changes to your connection's configuration.
If the Internet connection does not provide automatic IP addressing, you must manually configure an IP address configuration. To obtain an IP address configuration, see the network administrator of the network to which you are connecting. To manually configure a computer running Windows XP for an IP address configuration, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the network connection that corresponds to the Ethernet network adapter attached to the Internet, and then click Properties.
3.   On the General tab, double-click Internet Protocol (TCP/IP) in the This connection uses the following items list.
4.   On the General tab, click Use the following IP address and type the IP address, subnet mask, and default gateway as instructed. Click Use the following DNS server addresses and type the IP address of a preferred and alternate Domain Name System (DNS) server as instructed.
5.   Click OK to save the changes to your connection's configuration.
Next, you must enable the Windows Firewall feature of Windows XP with Service Pack 2 (SP2), the Internet Connection Firewall (ICF) feature of Windows XP with Service Pack 1 (SP1) or Windows XP with no service packs installed, or a third-party firewall to help protect the ICS host computer from malicious Internet users.
To enable Windows Firewall on the ICS host computer, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Windows Firewall.
2.   Click On, and then click OK.
To enable ICF on the Internet connection of the ICS host computer, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the Ethernet network connection that corresponds to the Ethernet network adapter attached to the Internet, and then click Properties.
3.   On the Advanced tab, select the Protect my computer by limiting or preventing access to this computer from the Internet check box.
4.   Click OK to save changes to your connection.
After the ICS host computer is connected to the Internet, verify that you have Internet connectivity by using a Web browser such as Internet Explorer to view a few Web sites. To ensure that you are not viewing locally stored copies of Web page contents, refresh each Web page that you view.
When you are confident that you are accessing the Internet from the ICS host computer, proceed to the next step.
2. Enabling Internet Sharing on the Internet Connection of the ICS Host Computer
To enable Internet sharing on the Internet connection of the ICS host computer, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the Ethernet network connection that is used to access the Internet, and then click Properties.
3.   On the Advanced tab, select the Allow other network users to connect through this computer's Internet connection check box and clear the Allow other network users to control or disable this shared Internet connection check box.
4.   Click OK to save changes to your connection.
5.   You might be prompted with a Local Network message box that explains how your computer's configuration is being changed. Click Yes to enable Internet sharing.
3. Creating an Ad Hoc Wireless Network on the ICS Host Computer
To create an ad hoc wireless network to share Internet access with the other WLAN computers on a computer running Windows XP with SP2 or Windows XP with SP1 and the WPA Wireless Security Update in Windows XP, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the wireless network connection, and then click Properties.
3.   Click the Wireless Networks tab.
4.   In the wireless network adapter properties dialog box, click Add under Preferred networks.
5.   On the Association tab, type the name of your ad hoc wireless network in Network name (SSID). For example, you could name your wireless network AdHocInternet.
6.   Select the This is a computer-to-computer (ad hoc) network check box and clear the The key is provided for me automatically check box.
7.   In Network Authentication, select Open.
8.   In Data encryption, select WEP.
9.   In Network key, type the WEP key. The WEP key should be a random sequence of hexadecimal digits or numbers, letters, and punctuation.
10.   In Confirm network key, retype the WEP key.
11.   Click OK to save changes to the wireless network.
12.   Click OK to save changes to the wireless network adapter.
To create an ad hoc wireless network to share Internet access with the other WLAN computers on a computer running Windows XP with SP1, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the wireless network connection, and then click Properties.
3.   Click the Wireless Networks tab.
4.   In the wireless network adapter properties dialog box, click Add under Preferred networks.
5.   On the Association tab of the Wireless Network Properties dialog box, type the name of your ad hoc wireless network in Network name (SSID). For example, you could name your wireless network AdHocInternet.
6.   Select the Data encryption (WEP enabled) and This is a computer-to-computer (ad hoc) network check boxes and clear the The key is provided for me automatically check box.
7.   In Network key, type the WEP key. The WEP key should be a random sequence of hexadecimal digits or numbers, letters, and punctuation.
8.   Retype the WEP key in Confirm network key.
9.   Click OK to save changes to the wireless network.
10.   Click OK to save changes to the wireless network adapter.
To create an ad hoc wireless network to share Internet access with the other WLAN computers on a computer running Windows XP with no service packs installed, do the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the wireless network connection, and then click Properties.
3.   Click the Wireless Networks tab.
4.   In the wireless network adapter properties dialog box, click Add under Preferred networks.
5.   In the Wireless Network Properties dialog box, type the name of your ad hoc wireless network in Network name (SSID). For example, you could name your wireless network AdHocInternet.
6.   Select the Data encryption (WEP enabled) and This is a computer-to-computer (ad hoc) network check boxes and clear the The key is provided for me automatically check box.
7.   In Key format, select a key format.
8.   In Key length, select a key size.
9.   In Network key, type the WEP key. The WEP key should be a random sequence of hexadecimal digits or numbers, letters, and punctuation.
10.   Click OK to save changes to the wireless network.
11.   Click OK to save changes to the wireless network adapter.
These instructions configure an encryption key for wireless communications on the ad hoc wireless network. You must tell the other users who want to access the Internet the WEP key. You can create an ad hoc wireless network without requiring encryption and an encryption key, but it is not recommended.
4. Connecting to the New Ad Hoc Wireless Network from the Other Laptop Computers
To connect each other laptop computer to the newly created ad hoc mode wireless network, do the following:
1.   Once the new ad hoc wireless network is created, Windows XP on other laptop computers should detect it and prompt you with a One or more wireless networks are available or Wireless networks detected message in the notification area of your taskbar.
2.   Click the notification message.
If you are not notified, right-click the wireless network adapter in Network Connections and click View Available Wireless Networks.
You should see the Wireless Network Connection dialog box (for Windows XP with SP2), a dialog box with the name of the wireless connection (for Windows XP with SP1), or the Connect to Wireless Network dialog box (for Windows XP with no service packs installed). An example of the Wireless Network Connection dialog box for Windows XP with SP2 is shown in the following figure.
 
3.   For Windows XP with SP2, click the name of the new ad hoc wireless network in the list, and then click Connect. When prompted by the Wireless Network Connection dialog box, the WEP key in Network key and Confirm network key, and then click Connect.
For Windows XP with SP1, click the name of the new ad hoc wireless network in Available networks, type the WEP key in Network key and Confirm network key, and then click Connect.
For Windows XP with no service packs installed, click the name of the new ad hoc wireless network in Available networks, type the WEP key in Network key, and then click Connect.
Now that the laptop computer is connected to the ad hoc wireless network, you must configure it for either Windows Firewall or ICF and automatic addressing by doing the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the network connection that corresponds to the wireless network adapter, and then click Properties.
3.   For computers running Windows XP with SP2, click the Advanced tab, and then click Settings. From the Windows Firewall dialog box, click On, and then click OK.
For computers running Windows XP with SP1 or Windows XP with no service packs installed, click the Advanced tab, and then select the Protect my computer and network by limiting or preventing access to this computer from the Internet check box.
4.   Click the General tab, double-click Internet Protocol (TCP/IP) in the This connection uses the following items list.
5.   On the General tab, click Obtain an IP address automatically and Obtain DNS server address automatically.
6.   Click OK to save the changes to the configuration of Internet Protocol (TCP/IP).
7.   Click OK to save the changes to your connection's configuration.
The laptop computer should receive an IP address configuration from the ICS host computer and have Internet connectivity. Test Internet connectivity by using a Web browser to view Web pages.

Restoring the Configuration of the ICS Host Computer
After the ad hoc Internet sharing is no longer needed, you can restore the configuration of the ICS host computer running Windows XP by doing the following:
1.   From the Windows XP desktop, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
2.   Right-click the Ethernet network connection that is used to access the Internet, and then click Properties.
3.   On the Advanced tab, clear the Allow other network users to connect through this computer's Internet connection check box. If you are shutting down the computer to later connect it to a secure private network, such as an organization intranet and for which a firewall is not required, do one of the following:
·   For computers running Windows XP with SP2, click Settings. From the Windows Firewall dialog box, click Off, and then click OK.
·   For computers running Windows XP with SP1 or Windows XP with no service packs installed, clear the Protect my computer by limiting or preventing access to this computer from the Internet check box.
4.   Click OK to save changes to your connection.
The IP address configuration of the wireless network connection is restored back to its original settings.

Summary
To share an Ethernet-based Internet connection with other ad hoc wireless computers, configure an ICS host computer to connect to the Internet using an Ethernet network adapter, configure the Ethernet network connection for Internet sharing, create an ad hoc wireless network, and then configure each other wireless computer to use the ad hoc wireless network and for automatic addressing. To restore the configuration of the ICS host computer, disable Internet sharing on the Ethernet network connection.

Related Links
See the following resources for further information:
·   Home and Small Office Networking with Windows XP at http://www.microsoft.com/homenet
·   Configure Internet Connection Sharing in Windows XP at http://support.microsoft.com/default.aspx?scid=kb;en-us;Q306126&sd=tech
·   Troubleshooting Internet Connection Sharing in Windows XP at http://support.microsoft.com/default.aspx?scid=kb;en-us;308006

For the latest information about Windows XP, see the Windows XP Web site at http://www.microsoft.com/windowsxp.



*

Offline olej

  • **
  • 116
    • http://www.blask-swieczki.pl
Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #1 dnia: Wrzesień 25, 2005, 14:30:19 »
Witam,

Mam problem z podłączeniem Asusa A730W do internteu poprzez laptopa z wifi.

Robiłem wszystko tak jak jest opisane w tym dokumencie ale bez skutku!
Asus pokazuje status jako connected, ale i tak nie mam połączenia z internetem,

krok po kroku opiszę co robie i plizz powiedzcie gdzie popełniam błąd.

W wieć na laptopie z dostępem do internetu poprzez aster, na karcie sieciowej lan do której podpięty jest modem aster, zaznaczam opcję
 "Allow other network users to connect....".

Następnie wchodzę w właściwości karty wifi, w zakładkę Wireless networks i naciskam guzik add.
ssid: dell
network aut.: open
Data encryption: disabled

Zaznaczam opcje "this is a computer-to-computer (adhoc) network..."

zakładka connection: zaznaczam "connect when this network is in range"

Daje ok.

Teraz na liscie dostepnych sieci beszprzewodowych mam sieć dell.

A teraz włączam sieć w asusie
wyskakuje okienko "new network detected"

"dell" network connects me to:
zostawiam, zaznaczone "the internet"
i daje connect
(sprawdzalem oczywiscie tez z "work")

w wifi status mam "connected"

I teraz otwieram ie na asusie, wpisuje jakis adres i co? ....  i nic :(
"the page you are looking fo cannot be found"

wpisuje tez http://213.76.141.233/  (pdaclub.pl)

i dostaje to samo :( czyli %#@#$^@$!!!! :(


Panowie!! Co ja źle robię  HEEELLPP

firewall xp nie jest włączony a firwall norton internet security na chwile wyłączyłem i też nic.

*

Offline mALy_boy

  • **
  • 125
    • www.f1ultra.pl
  • Sprzęt: HTC Diamond 2 Kingston 8GB SDHC
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #2 dnia: Czerwiec 29, 2007, 20:37:59 »
Jako że kilka dni temu po długich bojach udało mi się ustawić sieć bezprzewodową przez ad-hoc z udostępnionym Internetem to myślę, ze dobrym pomysłem będzie jeśli opisze wszystko krok po kroku w oparciu o instrukcje łopatologiczno-obrazkową. Oczywiście zdaje sobie sprawę z tego, że każdy posiada innego Pocketa i inną kartę sieciową, jednak wiele z omawianych ustawień pokrywa się we wszystkich urządzeniach, więc przy odrobinie chęci każdemu powinno się udać. Zatem do roboty :)

Sprzęt:

Pocket: Fujitsu-Siemens Loox N520
Karta WiFi: Pentagram horNET Lite USB P6122-07 + dołączone do zestawu oprogramowanie Ralink v1.2.7.0 (karta podłączana do portu USB) - Cena 49.99 zł

- Windows XP SP2 Home Edition, Norton Internet Security
- Komputer z dostępem do Internetu podłączony do sieci osiedlowej

Konfiguracja:

Po instalacji sterowników karty sieciowej, wpięciu karty (w moim przypadku USB) i wykonaniu restartu systemu (na wszelki wypadek) przystępujemy do ustawień IP, DNS, Bramy itp. Aby tego dokonać klikamy Start -> Panel sterowania -> Połączenia sieciowe i internetowe -> Połączenia sieciowe. Pojawi się okno z dostępnymi sieciami.



W moim przypadku komputer łączy się z Internetem poprzez połączenie "Internet". Sieć "Pocket PC" to połączenie bezprzewodowe, które pojawiło się w momencie wykrycia karty WiFi przez system. Zacznijmy więc od ustawień karty bezprzewodowej. W tym celu klikamy na ikonę sieci prawym klawiszem myszy i wybieramy "Właściwości". Pojawi się nowe okno, z którego wybieramy "Protokół internetowy TCP/IP" (na dole listy), a następnie ponownie wybieramy "Właściwości".



Pojawi się nowe okno gdzie (na sztywno) wpisujemy IP, DNS i bramę taką jak podana na screenie poniżej. W moim przypadku nie udało się ustawić sieci poprzez automatyczne przydzielanie IP.



Następnie klikamy "Zaawansowane", a w nowym oknie udajemy się do zakładki WINS i zaznaczamy "Włącz system NetBIOS przez TCP/IP i zatwierdzamy wszystkie wprowadzone zmiany (OK).



Następnie przystępujemy do ustawień sieci która ma dostęp do Internetu. W moim przypadku jest to sieć "Internet". Klikamy na ikonę prawym klawiszem myszy i wybieramy "Właściwości", a następnie w nowym oknie przechodzimy do zakładki "Zaawansowane". Tutaj zaznaczamy opcję "Zezwalaj innym użytkownikom sieci na łączenie się poprzez połączenie internetowe tego komputera". Opcje dotyczącą kontroli połączenia zostawiamy wyłączoną.



Jeśli zależy nam dodatkowo na możliwości udostępniania plików w sieci PC - PDA klikamy na "Ustawienia" w sekcji "Zapora systemu Windows" (na górze). W nowym oknie przechodzimy do zakładki "Zaawansowane" i z listy dostępnych sieci odznaczamy połączenie z kartą WiFi ("Pocket PC").



W moim przypadku bez odznaczenia tego połączenia Pocket nie wykrywał udostępnionych w sieci folderów. Podobnie jest w przypadku zewnętrznego programu z opcja zapory, który również na czas przesyłania plików należy wyłączyć albo odpowiednio skonfigurować. Tracimy oczywiście na bezpieczeństwie no ale coś za coś. Udostępnione pliki mp3 można odtwarzać bezpośrednio z dysku PC poprzez odtwarzacz TCPMP. Windows’owy Media Player sobie z tym nie radzi. W przypadku filmów sprawa wygląda nieco gorzej, gdyż co kilka minut obraz na chwile staje, a Pocket dociąga z sieci brakujący fragment filmu (dotyczy klipów o dużym bitracie).

Następnie przechodzimy do programu dołączonego do karty WiFi.



W nowym oknie przechodzimy do zakładki "Profile" i wybieramy "Add" co pozwoli na konfiguracje połączenia.



Ustawiamy:

(zakładka "Configurations")



Profile name: czyli nazwę profilu pod jakim będą dostępne nasze ustawienia
SSID: nazwę naszej sieci
Network Type: Ad hoc (koniecznie!)
TX Power: siłę sygnału karty

(zakładka "Authentication and Security")



Authentication Type: Open
Encryption: WEP

Wpisujemy hasło w Hex albo ASCII. Jak widać ja wpisałem 12345 (Zalecam wybrać Key #1). Klikamy "OK" by zatwierdzić zmiany.

Przejdźmy teraz do ustawień PDA. Odpalamy moduł WiFi i udajemy się do ustawień karty Pocketa (Start -> Settings -> Connections -> Network Cards).



Wybieramy zakładkę "Network Adapters", a następnie z listy wybieramy moduł odpowiedzialny za ustawienia karty WiFi (w przypadku FS Loox'a N520 jest to "LOOX WLAN Wireless Adaper".



Pola uzupełniamy wzorując się na poniższych screenach:

(zakładka "IP Adress")



(zakładka "Name Servers")



Tutaj mała uwaga. Jako że wpisujemy na sztywno adresy IP, DNS itp. jest bardzo prawdopodobne, ze w przypadku prób nawiązania połączenia z Access Pointem na mieście zmuszeni będziemy ponownie wejść w ustawienia karty WiFi w Pockecie i wybrać ustalanie IP przez serwer (tzn. przydzielanie automatyczne).

Zatwierdzamy zmiany, wyłączamy moduł WiFi i włączamy go ponownie. Pocket powinien sam wykryć sieć i zapytać o hasło dostępu. Wpisujemy 12345 i stukamy w napis "Connect".



Mam nadzieję, ze opisałem wszystko możliwie prosto i przystępnie, a po kliknięciu w "Connect" każdy uświadczy uroków jakie niesie ze sobą Internet w PDA ;)

*

Offline Bartolomeo

  • *
  • 67
  • Płeć: Mężczyzna
  • Sprzęt: ASUS MyPAL A639 i Xperia P
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #3 dnia: Luty 22, 2008, 20:36:42 »
:grin: Jestem wielce dźwięczny za ten tutek :grin:

Jest małe ale (żeby nie było całkiem OT :wink:):
Otóż, jeżeli w sieci jest już adres 192.168.0.1 to nici z udostępniania połączenia! Wyskoczy błąd że nie może i tyle.
Trzeba tam ten adres zmienić.
Zauważyłem też, że u mnie po udostępnieniu połączenia Internetowego zmienił mi w ustawieniach WiFi adres IP właśnie na 192.168.0.1; a bramę domyślną usunął.
Ręcznie przywróciłem adresy (tyle, że moje to 192.168.10.1) i działa super. A adresik na karcie WiFi w PDA dałem 192.168.10.100. Takie mam zwyczaje że w sieci domowej kompy maja numery od 100 :ohreally: .
Miałem też problem, nie chciał mi się PDA połączyć z kompem tak ładnie, ale po prostu pousuwałem sieci, które PDA pamietało (z poprzednich bojów...) odczekałem, zresetowałem i potem wsio było :ok: .

Dzieki raz jeszcze.
Pozdrawiam wszystkich :)

Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #4 dnia: Marzec 25, 2008, 17:43:22 »
Mam rozumieć, że żeby się połączyć w domu z Wi-fi trzeba mieć kartę w komputerze? Próbowałem już na różne sposoby się połączyć, czytałem wiele poradników ale i tak nie mogę tego dokonać :( Np u mojego wujka który kiedyś ze mną mieszkał działało wi-fi a w nowym domu mu nie działa. U mnie jest na odwrót :/

*

Offline jakubd

  • *****
  • 2820
  • Płeć: Mężczyzna
  • To error is human, to forgive is not our policy.
    • jdtech.pl
  • Sprzęt: N900, Milestone, Galaxy Tab
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #5 dnia: Marzec 28, 2008, 18:06:40 »
Shatan: żeby się połaczyć przez WiFi, musisz mieć się z czym połaczyć: jak masz telefon stacjonarny, to on sam z siebie nie działa, musisz go podłączyć do gniazdka z linią telefoniczną. Tak samo żeby podłączyć się za pomocą WiFi, musisz mieć albo skonfigurowany poprawnie access point albo router bezprzewodowy (sieć typu Infrastructure), lub ewentualnie komputer z kartą sieciową WiFi (wtedy w większości przypadków będzie to sieć AdHoc, choć niektóre karty sieciowe jak ta w opisie powyżej potrafią udawać Access Pointa).
Sprzęt: 5MX, SimPad, BlueAngel, Hermes, N810, 8510p, k810i, PSP, 2133, MBW150, RedFly, G1, d780, HP HDX Dragon, E75, 5101, Rose, 3GS, N900, Uni, c901, Milestone, N96, Rhodium, Huawei e5, Envy 17, Galaxy Tab, e6500

Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #6 dnia: Kwiecień 02, 2008, 09:55:14 »
Witam

Posiadam Mio P550 mam z nim problem taki:

w domu mam internet rozdzielony routerem. ten internet zabezpieczylem kluczem. i na zabezpieczonym nie moge sie polaczyc a gdy go odbezpiecze to bez wiekszych problemow. i ten sam problem pojawia sie w hotelach gdzie internet jest zabezpieczony posiadam prawidlowe haslo po w pisaniu nie chce sie polaczyc - probuje a zachwile jest w okienku informacja ze siec jest dostepna.


*

Offline warma

  • 5
  • Płeć: Mężczyzna
  • Sprzęt: SPV M3000 WM 5  ;/
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #7 dnia: Sierpień 03, 2008, 12:19:15 »
hehe u mnie bylo podobnie dalem ip 192.168.100.1 i smiga jak ta lala :D

Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #8 dnia: Wrzesień 26, 2008, 17:59:20 »
a na moim Asusie A696 nie idzie jak ta lala nie wiem co robię źle robię wszystko jak w opisie i nic  :-|

*

Offline perla

  • ******
  • 2689
  • Sprzęt: Samsung Tab2- 7, Galaxy S2 , Kindle 3,
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #9 dnia: Wrzesień 28, 2008, 09:45:07 »
Shatan pyta :
"Mam rozumieć, że żeby się połączyć w domu z Wi-fi trzeba mieć kartę w komputerze?"
Nie,  wystarczy i jest duzo wygodniej gdy router ma nadajnik WiFi.
Wtedy to polaczenie nie jest typu Ad-hoc a normalne polaczenie sieciowe jakie realizujesz np. do Hotspota.

*

Offline bradley86

  • **
  • 172
  • Sprzęt: MDA Vario IV
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #10 dnia: Grudzień 30, 2009, 18:38:22 »
Juz nie wazne. W momencie kiedy napisalem posta, zaczelo dzialac. Reset pomogl.
MDA Vario IV, WM6.5 23658 stock-like Kitchen, 1.10.Olinex

Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #11 dnia: Styczeń 02, 2010, 21:57:30 »
Jak usunąć wszystkie sieci z ktorymi poprzednio sie laczylem. Wykorzystujac opcje "usun ustawienia" nie daje ona rezultatow, jest inna opcja ??

*

Offline jakubd

  • *****
  • 2820
  • Płeć: Mężczyzna
  • To error is human, to forgive is not our policy.
    • jdtech.pl
  • Sprzęt: N900, Milestone, Galaxy Tab
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #12 dnia: Styczeń 02, 2010, 22:44:25 »
Można ręcznie usuwać każde zapisane połączenie właśnie tą opcją. Jak nie działa, to w zasadzie pozostaje zrobienie twardego resetu urządzenia, jeżeli mówimy o Windows Mobile.
Sprzęt: 5MX, SimPad, BlueAngel, Hermes, N810, 8510p, k810i, PSP, 2133, MBW150, RedFly, G1, d780, HP HDX Dragon, E75, 5101, Rose, 3GS, N900, Uni, c901, Milestone, N96, Rhodium, Huawei e5, Envy 17, Galaxy Tab, e6500

*

Offline mikepolo

  • *
  • 65
  • Sprzęt: SPV M600 --> XDA IIi --> ACER F900
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #13 dnia: Styczeń 16, 2010, 12:25:00 »
Postąpiłem zgodnie z tutorialem... mam polączenie ! Pda jest "connected" i tak samo laptop. Laptop komunikuje sie z netem za pomocą kabla z modem, natomiast sam ma wifi - które to chce wykożystać do przesyłania plików z PDA. Ale resco, anie explorer ani tcpmp nie widzą żadnego dysku/kompa w otoczeniu sieciwym!!! Co robić ?
« Ostatnia zmiana: Styczeń 16, 2010, 12:30:20 wysłana przez mikepolo »

*

Offline jakubd

  • *****
  • 2820
  • Płeć: Mężczyzna
  • To error is human, to forgive is not our policy.
    • jdtech.pl
  • Sprzęt: N900, Milestone, Galaxy Tab
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #14 dnia: Styczeń 16, 2010, 13:35:52 »
Sam w sobie WM nie "widzi" komputerów w sieci. Musisz mu ręcznie wpisać nazwę sieciową komputera, np. "\\komputerjakuba" i nie może to być adres zbudowany z adresu IP.
Sprzęt: 5MX, SimPad, BlueAngel, Hermes, N810, 8510p, k810i, PSP, 2133, MBW150, RedFly, G1, d780, HP HDX Dragon, E75, 5101, Rose, 3GS, N900, Uni, c901, Milestone, N96, Rhodium, Huawei e5, Envy 17, Galaxy Tab, e6500

*

Offline m-bee

  • **
  • 231
  • Sprzęt: SGH-i780 (Niki 100, C600)
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #15 dnia: Styczeń 25, 2010, 00:20:41 »
czy mozna udostepnic internet z ppc na komputer?  :ohreally:
To zbyt oczywiste ale proste rozwiązania są zwykle właściwe.

*

Offline jakubd

  • *****
  • 2820
  • Płeć: Mężczyzna
  • To error is human, to forgive is not our policy.
    • jdtech.pl
  • Sprzęt: N900, Milestone, Galaxy Tab
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #16 dnia: Styczeń 25, 2010, 10:37:15 »
Przy tej ilości informacji da się odpowiedzieć tylko jedno: Tak, można.
Sprzęt: 5MX, SimPad, BlueAngel, Hermes, N810, 8510p, k810i, PSP, 2133, MBW150, RedFly, G1, d780, HP HDX Dragon, E75, 5101, Rose, 3GS, N900, Uni, c901, Milestone, N96, Rhodium, Huawei e5, Envy 17, Galaxy Tab, e6500

*

Offline m-bee

  • **
  • 231
  • Sprzęt: SGH-i780 (Niki 100, C600)
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #17 dnia: Luty 10, 2010, 12:16:23 »
no tak...  :E mozna sie bylo tego spodziewac
Pomoglem sobie sam... WMWifiRouter
To zbyt oczywiste ale proste rozwiązania są zwykle właściwe.

Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #18 dnia: Marzec 01, 2010, 22:47:22 »
Jest Ktoś w stanie zrobić tutka połączenia AD-HOC pomiędzy :
-komputer PC z systemem Vista,w którym mamy internet bezprzewodowy Play lub coś w tym stylu
-WiFi w tym PC
a
-PDA na WindowsMobile 5 z WiFi


?
Dwa ciężkie dni za mną i wiele prób...Na 3 forach siedze i nigdzie nie znalazłem rozwiązania...
Problem w tym,że muszę mieć konkretne rozwiązanie tak jak powyżej czyli PC z Vista,Play,Wifi itd.
Wszelkie inne podobne przypadki są tylko przypadkami i jedyne co udało mi się zrobić to połaczyć PC z PDA,ale netu na pda brak.
« Ostatnia zmiana: Marzec 01, 2010, 22:49:53 wysłana przez manhattan »

*

Offline jakubd

  • *****
  • 2820
  • Płeć: Mężczyzna
  • To error is human, to forgive is not our policy.
    • jdtech.pl
  • Sprzęt: N900, Milestone, Galaxy Tab
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #19 dnia: Marzec 03, 2010, 11:20:03 »
Wygląda na to, że poczekasz jakiś czas, aż jakaś dobra dusza usiądzie i mając Vistę pod ręką zrobi dla ciebie tutoriala. Ale ja nie miałbym tyle cierpliwości (to może potrwać nawet parę miesięcy :) i po prostu za pomocą google, helpa wbudowanego w Viśtę i własnej głowy próbował dojść samemu, co trzeba zrobić dokładnie.
Procedura w każdym systemie jest mniej więcej taka sama: Włączyć wifi, ustawić sieć adhocową na ppc i win, a potem włączyć udostępnianie połączenia internetowego w windows, po czym przetestować za pomocą pingów, w razie jakiś problemów.
Sprzęt: 5MX, SimPad, BlueAngel, Hermes, N810, 8510p, k810i, PSP, 2133, MBW150, RedFly, G1, d780, HP HDX Dragon, E75, 5101, Rose, 3GS, N900, Uni, c901, Milestone, N96, Rhodium, Huawei e5, Envy 17, Galaxy Tab, e6500

*

Offline marx

  • ****
  • 640
  • Płeć: Mężczyzna
  • Sprzęt: Samsung Galaxy Note II
Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #20 dnia: Marzec 10, 2010, 11:30:36 »
Moglby ktos udostepnic oprogramowanie RaLink? bo mam klucz USB z funkcja AP, ale niestety cos ten soft nie bardzo dziala :(

Odp: Polaczenie WiFi PPC a PC- Krok po kroku TUTORIAL
« Odpowiedź #21 dnia: Marzec 20, 2010, 15:08:32 »
okey a co z ustawieniem grupy roboczej??
przy polaczeniu 2 komputerow bez tego komputery sie nie zobacza poprostu a jak to z pda i pc wyglada??